Made in Finland


The Orima solar module mounting system has been designed to withstand Nordic weather conditions. It is durable, water-resistant and adaptable to all standard roofing types, both pitched and flat roofs

The modular system is suitable for most solar panels. 

Orima Mounting System for Solar Panels

Solar panel mounts

Orima Solar Panel Mounts


The Orima mounting system is based on modules, proven roof mounts and a profile frame. 

On pitched roofs, the mounts are fixed onto the roof, using brackets that suit the roofing material. If necessary, it is easy to design and install Orima® roof walkways, snow guards and ladders on the same roof. 

On flat roofs, the solar panels are installed either directly on the brackets or on the optional profile frame. 

Advantages of the Orima® solar module mounting system

  • Mechanically fast, water-resistant and proven mounting on the roof
  • Excellent resistance to corrosion thanks to the new Magnelis® coating
  • Quick installation
  • Suitable for all standard roofing types

Thanks to the modular rack, the system can be used with different solar panel sizes. 

All of our products are made in Finland. 

Download the Orima® solar panel mounts brochure

Orders and enquiries: aurinko(at)orima.fi or tel. +358 3 872 1011.

Solar panels mounted on a tile roof.

Solar panels mounted on a tile roof. The panels are installed vertically, leaving a blank space between the rows to facilitate maintenance. 



The mounts are  permanently installed onto the pitched roof, either on the ribs, sheathing, the seams between sheets or the sheets themselves, depending on the roofing. 

We recommend installing the solar panels near the crest. If the panels are installed near the eaves, a snow guard should be placed above them. This prevents snow from accumulating under the panels.

There should be room for air between the panels and the roof in order to keep the panels cool. The Orima® solar panel mounting system raises the panels off the roof surface,allowing snow and ice to fall off the roof.

Thanks to the profile frame, the mounting system can be used for different panel sizes, both horizontally and vertically. 

The mounting system for pitched roofs is available for the following roofing types:

  • Seam metal roofs, such as machine-jointed roofs or Wekcman Elegant roofs
  • Profile roofs or corrugated sheet roofs
  • Felt roofs
  • Brick-patternsheet roofs or profiled sheets, such as Weckman Teräsaateli roofs
  • Tile roofs

Orima_solar _panel_fasteners.JPG



Solar panels are installed on an angle also on flat roofs to achieve maximum capacity. The adjustable bracket is installed at the correct angle (20–45°) on site.

The flat roof brackets can be equipped with a profile frame, depending on the roof and solar module features. The fixed-angle bracket can be equipped with a back panel to control the wind load.

The panel brackets are installed onto the roof with weights. This eliminates unwanted holes in the roofing material also on flat roofs. 


Installation to wall with adjustable brakets.

Aurinkopaneelikiinnikkeet profiilirungolla tasakatolle

Mounting system with profile frame for flat roofs. 

This site uses cookies. Some of the cookies we use are essential for parts of the site to operate and have already been set. You may delete and block all cookies from this site, but parts of the site will not work.